(1)清洗物体的材料性能。如超声波清洗机清洗物体是金属材料，则应考虑到钢铁、不锈钢、铝材、钥材制成的物体在强度、耐化学腐蚀性能上都有很大判别.由木材、皮革、玻瑞、塑料、橡胶等非金属材料制成的物体在性能上也有很大差别。因此在清洗中要充分了解这些材料的性能，有针对性地选用合适的清洗剂与清洗方法。

(1) Material properties of cleaning objects. If the object to be cleaned by the ultrasonic cleaning machine is a metal material, it should be considered that the objects made of steel, stainless steel, aluminum and key materials have great discrimination in strength and chemical corrosion resistance Objects made of non-metallic materials such as wood, leather, Borui, plastic and rubber also have great differences in performance. Therefore, it is necessary to fully understand the properties of these materials and select appropriate cleaning agents and methods.

(2)清洗物体的表面状况。光滑平整的物体表面与粗糙不均匀的物体表面用同样的方法清洗，取得的效果是大不相同的。在选择清洗方法时要充分考虑物体的表面状况。

(2) Clean the surface condition of the object. The smooth and flat object surface and the rough and uneven object surface are cleaned by the same method, and the results are very different. The surface condition of the object shall be fully considered when selecting the cleaning method.

(3)污垢的情况。对于不同的污垢要采用不同的清洗剂，对于金属表面以油脂为主的污垢与以水垢、氧化物为主的污垢所选用的清洗剂及清洗方法是大不相同的。

(3) Dirt condition. Different cleaning agents should be used for different dirt. The cleaning agents and methods used for dirt on the metal surface mainly composed of grease and dirt mainly composed of scale and oxide are very different.

(4)要求洗净的程度。对于普通金属零件和高精密电子元件，由于对表面加工精度要求不同，洗净去污的要求不同，因此选用的方法也不同。随着洗净度要求提高，生产成本也迅速提高。因此必须兼顾清洁度要求与经济性两方面要求，选择合适的清洗剂与方法。

(4) The degree of cleaning required. For common metal parts and high-precision electronic components, due to different requirements for surface machining accuracy and cleaning and decontamination, the methods selected are also different. With the improvement of cleanliness requirements, the production cost has also increased rapidly. Therefore, the requirements of cleanliness and economy must be taken into account, and appropriate cleaning agents and methods must be selected.

(5)使用的清洗设备。使用的超声波清洗机清洗设备可以取得较好的清洗效果，但也要考虑到实际需要的必要性。

(5) Cleaning equipment used. The use of advanced ultrasonic cleaning equipment can achieve better cleaning results, but it is also necessary to consider the actual needs.

(6)使用的洗涤剂性。在选择洗涤剂时要充分了解洗涤剂的性能。如是否易燃易爆，对皮肤刺激性如何，对人有性以及废水如何处理等，以免在清洗过程中造成不必要的意外事故。

(6) Safety of detergent used. When choosing detergent, we should fully understand the performance of detergent. Such as whether it is flammable and explosive, how irritating it is to the skin, how non-toxic it is to people, and how to treat the waste water, so as to avoid unnecessary accidents during the cleaning process.

(7)清洗的效率。提高山东超声波清洗机清洗去污的效率是十分重要的，如用单纯浸泡的方法去除金属表面的污物耗时较多，而采用循环流动伴有搅拌、超声波处理或蒸气清洗时去污时间就可大大缩短。对于大批工业零件的清洗，采用流水线可以大幅度提高生产效率。因此要根据实际需要选择不同的清洗方法。

(7) Cleaning efficiency. It is very important to improve the cleaning and decontamination efficiency of Shandong ultrasonic cleaning machine. For example, it takes more time to remove the dirt on the metal surface by simply soaking, and the decontamination time can be greatly shortened by using circulating flow with stirring, ultrasonic treatment or steam cleaning. For the cleaning of a large number of industrial parts, the use of assembly lines can greatly improve the production efficiency. Therefore, different cleaning methods should be selected according to actual needs.

此外在选择清洗方法时，必须考虑生产成本。在保证清洁度的前提下，使用便宜的方法，即是合理的选择。以上便是关于清洗机选择清洗方法时要考虑到几种情况的相关内容，您可以来我们网站关注咨询！

In addition, the production cost must be considered when selecting the cleaning method. On the premise of ensuring the cleanliness, using cheap methods is a reasonable choice. The above is about several situations that should be considered when selecting cleaning methods for the cleaning machine. You can visit our website at www.jnthcsb Com follow the consultation!