很多刚刚买到全自动超声波清洗机的客户并不知道怎样安装，复杂的说明书让人觉得很复杂。其实并不是特别难，掌握以下的方法即可。

Many customers who just bought the automatic ultrasonic cleaning machine do not know how to install it. The complicated instructions make people feel very complicated. In fact, it is not particularly difficult to master the following methods.

1、做好预备工作

1. Make preparations

全自动超声波清洗机的零件整齐的摆放在平面上，一般超声波换能器都是事先配对好的，所以要准备的只有钢铁、网垫、胶水等等。

The parts of the automatic ultrasonic cleaner are neatly placed on the plane. Generally, the ultrasonic transducers are matched in advance, so only steel, mesh pads, glue, etc. should be prepared.

2、喷砂清洗要细心

2. Be careful in sand blasting

先对准备好的零件进行金刚砂的喷砂，注意喷砂时要保证压力大于等于6kg。然后进行零件的清洗，先用甲醇，然后再用丙酮，后要用水进行清洁备用。

Sand blast the prepared parts with carborundum, and ensure that the pressure is no less than 6kg. Then, clean the parts with methanol, acetone and water for standby.

3、其余工作要检测

3. Other work shall be tested

清洗结束后要进行烘干预热和胶接，胶接后要加压处理，将钢体放入无尘箱进行停止固化。后对超声波机器进行检测，符合规范的投入使用。

After cleaning, drying, preheating and bonding shall be carried out. After bonding, pressure shall be applied and the steel body shall be put into a dust-free box to stop curing. After that, the ultrasonic machine shall be tested and put into use if it meets the specifications.

此外超声波清洗机在我们的日常生活中都占着十分重要的地位，所以我们都会害怕会发生故障，所以在平时的时候就应该注意一些日常的保养，才能够确保它正常使用，比如：

In addition, the ultrasonic cleaner plays a very important role in our daily life, so we are afraid of failure. Therefore, we should pay attention to some daily maintenance at ordinary times to ensure its normal use, such as:

要保持设备工作场所的通风以及捷径，这样才能够有利于超声波清洗机的长期运转以及工作环境的优化，定期清理清洗槽以及保持清净槽内的整洁，这样才能够提高耐用性。

Keep the ventilation and shortcut of the equipment workplace, so as to facilitate the long-term efficient operation of the ultrasonic cleaner and the optimization of the working environment. Regularly clean the cleaning tank and keep the cleaning tank clean, so as to improve the durability.

定期测试设备的绝缘性能，对一些电器来说，毕竟都有接地线，所以，确保老化电器组件定期的检查测试电源，确保符合电压的要求，避免过高或过低的电源下长期工作。

Regularly test the insulation performance of equipment. After all, some electrical appliances have grounding wires. Therefore, ensure that the aging electrical components regularly check and test the power supply to ensure that they meet the voltage requirements and avoid long-term work under too high or too low power supply.

总而言之，全自动超声波清洗机的安装程序并不是复杂的，只要你有耐心就可以轻松的完成。更多相关的注意事项就来我们网站进行咨询吧。

In a word, the installation procedure of the automatic ultrasonic cleaner is not complicated, as long as you have patience, you can easily complete it. For more information, please visit our website .