我们都知道全自动超声波清洗机的功能多样化，对于不同的产品也有不同的污渍的办法，下面小编为大家讲解的是全自动超声波清洗机的除油过程。

We all know that the functions of the automatic ultrasonic cleaning machine are diverse, and there are different ways to remove stains for different products. The following editor will explain the oil removal process of the automatic ultrasonic cleaning machine.

全自动全自动超声波清洗机具有多种清洗功能，清洗机可以根据不同的工艺，经过同一清洗流程，将不同的油品、绣品、粉尘等赃物清洗干净。在选择不同超声波清洗液时，一定要注意清洗温度的掌控，温度通常控制在四五十度即可。

Full-automatic and full-automatic ultrasonic cleaning machine has various cleaning functions. The cleaning machine can clean different oil products, embroideries, dust and other dirty goods through the same cleaning process according to different processes. When selecting different ultrasonic cleaning fluids, pay attention to the control of cleaning temperature, which is usually controlled at 40 or 50 degrees.

全自动全自动超声波清洗机通过对设备进行循环系统的增加，将清洗过程的产品进行过滤后反复使用，从而达到的目的。对清洗过程的水资源、清洗溶剂等过滤后进行重复使用，从而达到目的，大大提高了研发人员的综合形象特点。

Full-automatic ultrasonic cleaning machine can filter and reuse the products in the cleaning process by increasing the circulation system of the equipment, so as to achieve the purpose of energy saving. The water resources and cleaning solvents in the cleaning process are filtered and reused to achieve the purpose of environmental protection and greatly improve the comprehensive image characteristics of the R&D personnel.

全自动超声波清洗机通过自身的功能，减少了各种污染、清洗过程中给人们带来的危害，利用设备的现代化，大大减少的使用过程中产生的人力、物力的成本，同时也减少了人们的清洗等待时间。

Through its own functions, the fully automatic ultrasonic cleaning machine reduces all kinds of pollution and the harm brought to people in the process of cleaning. The modernization of the equipment greatly reduces the cost of human and material resources generated in the process of use, and also reduces people's waiting time for cleaning.

1、放入槽中

1. Put into the slot

因为清洗的是油污产品，所以要把有油污的这些产品，例如铝块、轴承、链条等统一放入到清洗的篮子中，然后放入清洗的槽中。

Because the products to be cleaned are oil contaminated products, these products with oil contamination, such as aluminum blocks, bearings, chains, etc., should be put into the cleaning basket, and then put into the cleaning tank.

2、加除油剂

2. Add degreasing agent

在清洗槽中加水，然后放入适合清洗产品的除油剂。记住一定要适量，不能过量，否则会影响清洗效果。

Add water into the cleaning tank, and then put in the degreaser suitable for cleaning products. Remember to use proper amount, not excessive amount, otherwise the cleaning effect will be affected.

3、打开电源

3. Turn on the power

要将全自动超声波清洗机的电源打开，这样机器便可以正式工作了。等到清洗一段时间之后，再放入到烘干槽中进行烘干的步骤，然后就完成了。

Turn on the power of the automatic ultrasonic cleaning machine, so that the machine can work formally. After cleaning for a period of time, put it into the drying tank for drying, and then it is finished.

全自动超声波清洗机的除油过程大概就如此了，除油的效果是非常好的，那么，如果有需求的话，不妨可以来我们网站进行咨询！

This is probably the oil removal process of the automatic ultrasonic cleaning machine. The oil removal effect is very good. If you need it, you can come to our website Consult!