欢迎访问宝典图库网站!

专注生产工业用超声波清洗机

让工业清洗无难事

电话

业务咨询电话:

18663767799

宝典图库
你所在位置: 首页-新闻动态-新闻资讯高压清洗机清洗中哪些参数比较重要!
新闻资讯

高压清洗机清洗中哪些参数比较重要!

作者:admin来源:/时间:2023-08-27

一、工作压力
1、 Work pressure
高压清洗机的工作压力应根据结垢性质合理选择。
The working pressure of the high-pressure cleaning machine should be reasonably selected based on the nature of scaling.
目前高压清洗机的清洗压力大致可以分为三类:
At present, the cleaning pressure of high-pressure cleaning machines can be roughly divided into three categories:
1)低压(100bar以下)
1) Low pressure (below 100bar)
这种清洗机压力通常在100bar以下,水泵大多数为低压往复泵或者是离心泵,清洗对象一般是污染不太严重的污垢。
The pressure of this type of cleaning machine is usually below 100bar, and most of the water pumps are low-pressure reciprocating pumps or centrifugal pumps. The cleaning object is generally dirt with less severe pollution.
2)高压(100bar-1000bar)
2) High pressure (100bar-1000bar)
这个压力段属于高压清洗机,工作压力范围是100bar-1000bar之间,水泵大多数是高压往复泵。清洗对象通常是污染较为严重的污垢。
This pressure section belongs to a high-pressure cleaning machine, with a working pressure range of 100-1000bar. Most water pumps are high-pressure reciprocating pumps. The cleaning object is usually heavily contaminated dirt.
压去毛刺清洗机
3)超高压(1000bar以上)
3) Ultra high pressure (above 1000bar)
工作压力大于1000bar的清洗机可以称为超高压清洗机,设备核心多为增压器或者是超高压往复泵。清洗对象通常是污染非常严重的污垢。
A cleaning machine with a working pressure greater than 1000bar can be called an ultra-high pressure cleaning machine, and the equipment core is mostly a booster or an ultra-high pressure reciprocating pump. The cleaning object is usually heavily contaminated dirt.
高压清洗机剥离能力与工作压力的关系如下:
The relationship between the stripping capacity of high-pressure cleaning machines and working pressure is as follows:
1)工作压力100bar,可用于剥离淤泥和疏松的岩层。
1) The working pressure is 100bar, which can be used to remove silt and loose rock layers.
2)工作压力210bar,可用于剥离轻度船舶垢污和轻度燃料油残留物及铝制散热器及壳体。
2) The working pressure is 210bar, which can be used to remove mild ship dirt and mild fuel oil residue, as well as aluminum radiators and shells.
3)工作压力320bar,可用于剥离普通衍生物、砂石和泥石层、疏松的混凝土、轻度热轧钢淀氧化层及疏松的漆层和锈层。
3) The working pressure is 320bar, which can be used to peel off ordinary derivatives, sand and debris layers, loose concrete, mild hot-rolled steel lake oxidation layers, and loose paint and rust layers.
4)工作压力400-700bar,可用于剥离管内混凝土、铸铁件模型、跑道除胶、轻基石灰石、石子层及焦油沉积物和常见石化垢层。
4) The working pressure is 400-700bar, which can be used to peel off the concrete inside the pipe, cast iron model, runway glue removal, lightweight limestone, gravel layer, tar deposits, and common petrochemical scale layers.
5)工作压力700-1050bar,可用于混凝土切割和剥离厚漆层、石灰石、大量热轧钢锭氧化皮矽土型芯、燃烧碳沉积物及厚层煤渣。
5) The working pressure is 700-1050bar, which can be used for concrete cutting and peeling thick paint layers, limestone, a large amount of hot rolled steel ingot oxide skin silica core, combustion carbon deposits, and thick coal slag.
6)工作压力1000-2100bar,可用于剥离花岗石、大理石、石灰岩、船舶的环氧基漆以及铅板、铝板橡胶、冷冻食品等的切割。
6) The working pressure is 1000-2100bar, which can be used for peeling granite, marble, limestone, epoxy based paint for ships, as well as cutting lead plate, aluminum plate rubber, frozen food, etc.
有了高压去毛刺清洗机上面的小总结,希望对广大客户有所帮助,如果有什么不理解的或者寻求帮助的请点击我们的网站: 或者来电咨询,我们会尽全力为您
With the summary on the high-pressure deburring cleaning machine, we hope it can be helpful to our customers. If you have any questions or need help, please click on our website: Or call for consultation, and we will do our best to solve it for you