①超声波清洗机的清洗速度快、效果好,对于顽固油污、指纹、汗渍、氧化层等都有非常好的清洁效果
① Ultrasonic cleaning machine cleaning speed, good effect, for stubborn oil, fingerprints, sweat, oxide layer has very good cleaning effect
②在夹缝中生存的油污我们用手很难处理干净,对于超声波清洗机来说so easy,而且机器操作也很简单
② It's very difficult for us to clean the oil in the crevice. It's so easy for the ultrasonic cleaning machine, and the operation of the machine is also very simple
还有几点使用注意需要跟大家说一下:
There are also several points for attention
①往清洗池加入的水好用纯净水,可以在买娃哈哈或怡宝的纯净水用,而且水不要重复使用,因为清洗过物品后产生的杂质颗粒会在超声波的环境下磨损镜片
① The water added to the cleaning pool is best pure water. You can buy pure water from Wahaha or Yibao in the supermarket, and the water should not be reused, because the impurity particles generated after cleaning will wear the lens in the ultrasonic environment
②液面高度以浸没将要清洗的零部件为准,一般不超过清洗池的四分之三,通常机器的内壁也会有水位大值的标注
② The height of the liquid level is subject to the immersion of the parts to be cleaned, generally not more than three-quarters of the cleaning pool, and the maximum water level is usually marked on the inner wall of the machine
③超声波能够进行精密清洗,但对泥类的污物处理能力较弱,所以如果需要清洗的物品上有黄泥或稀泥类的污物,应该先处理掉再放入超声波清洗机中清洗
③ Ultrasonic can carry out precision cleaning, but the ability to deal with sludge is weak, so if there is yellow mud or slime on the items to be cleaned, it should be disposed of first, and then put into the ultrasonic cleaning machine for cleaning
④清洗完毕后需要把洗过物品的水倒掉,好再放入干净的水清洗一下机器的内壁,用布或纸巾擦干内壁水分,这样可以延长超声波清洗机的使用寿命
④ After cleaning, you need to pour out the water that has been washed. It's better to put in clean water to clean the inner wall of the machine, and use cloth or paper towel to dry the inner wall. This can extend the service life of the ultrasonic cleaning machine
今天的超声波清洗机生产厂家精彩内容就给大家分享到这了,更多的精彩内容请点击我们的网站http://www.shanqijituan.com 进行关注留言,后续会有更多的精彩内容为您呈现.
Today's automatic feeding mixer wonderful content to share with you, more wonderful content please click on our website http://www.shanqijituan.com Follow the message, there will be more wonderful content for you