单工位旋转喷淋清洗机主要用零部件过程清洗，加工完成后，立即放入该清洗机清洗，然后再转入下道工序。刚加工完的产品清洗难度相对较低，清洗再转序可保证工作环境的清洁。当然，该机也可用于某些零件特殊工艺需求的清洗。

Single-station rotary spray cleaning machine is mainly used for parts process cleaning. After processing, it is immediately put into the cleaning machine for cleaning, and then transferred to the next process. The cleaning difficulty of the newly processed products is relatively low, and the cleaning process can ensure the cleanness of the working environment. Of course, this machine can also be used for cleaning some parts with special process requirements.

单工位旋转喷淋清洗机由清洗的腔室、存放液体的储液箱、清洗泵及附助装置组成，门的前部通道具有垂直气动门。腔内有固定工件的平台，人工可直接将工件放置在平台上，采用自动方式固定工件防止清洗时工件在水冲击下移位。也可根据需求设计其它的功能

The single-station rotary spray cleaning machine is composed of a cleaning chamber, a liquid storage tank, a cleaning pump and an auxiliary device. The front channel of the door has a vertical pneumatic door. There is a platform for fixing the workpiece in the cavity. The workpiece can be directly placed on the platform manually. The workpiece can be fixed automatically to prevent the workpiece from shifting under water impact during cleaning. Other functions can also be designed according to requirements

腔门设置合理，封闭性好，通过双手控制单元和气动“防坠落”系统，门完全地关闭。

The chamber door is set reasonably and closed well. The door can be closed completely and safely through the two-handed control unit and the pneumatic "fall prevention" safety system.

单腔式喷淋清洗机以喷淋清洗为主，大压力可达2MPa,温度可达80℃，清洗液循环使用。有些特殊设计压会更高。可以从控制面板手动设置洗涤时间和液体温度。

The single-chamber spray cleaning machine is mainly used for spray cleaning, with high pressure up to 2MPa and temperature up to 80 ℃, and the cleaning fluid is recycled. Some special designs have higher pressure. The washing time and liquid temperature can be set manually from the control panel.

喷咀可采用定位方式，有针对性的冲击某个区域，达到完全清洗的目的。清洗完成后再通过压缩空气，吹去工件表面大量水分，即完成清洗过程。

The nozzle can be positioned to impact a specific area to achieve complete cleaning. After cleaning, a large amount of water on the surface of the workpiece is blown away by compressed air, which completes the cleaning process.

该机控制系统采用PLC控制，人机界面显示，温度、时间等参数可据需要调整。有低液位保护。各工艺参数及动作有联锁保护，确保清洗机在设定的程序及参数下正常运行。有故障记录及报警提示。

The machine control system adopts PLC control, man-machine interface display, temperature, time and other parameters can be adjusted as needed. There is low level protection. All process parameters and actions are interlocked to ensure the normal operation of the washing machine under the set procedures and parameters. There are fault records and alarm prompts.

腔体及储液箱等与液体接触的地方均采用不锈钢SUS304材料制做，泵及阀、管路等过流部分均采用不锈钢SUS304材料。流体过滤采用大流量精密过滤器，共有三级过滤装置。

The cavity and liquid storage tank and other places in contact with the liquid are made of stainless steel SUS304 material, and the pump, valve, pipeline and other overflow parts are made of stainless steel SUS304 material. High flow precision filter is adopted for fluid filtration, and there are three stages of filtration device.

以上就是单工位旋转喷淋清洗机的信息讲解内容了，您对此还有怎样的问题或者需求吗？欢迎来我们网站进行了解！

The above is the information of the single-station rotary spray cleaning machine. Do you have any questions or requirements? Welcome to our website !