全自动硅料清洗设备机具有清洗效果好，操作简单等优点，广泛应用于表面喷涂处理行业、机械行业、电子行业等。在其使用过程中，注意事项有如下几点：

Full automatic silicon material cleaning equipment has the advantages of good cleaning effect and simple operation. It is widely used in surface spraying treatment industry, machinery industry, electronic industry, etc. During its use, the following points should be noted:

1、超声波清洗机电源及加热器电源须有良好接地装置。

1. The power supply of ultrasonic cleaning machine and heater must be well grounded.

2、超声波清洗机严禁无清洗液开机，即清洗缸没有加一定数量的清洗液，不得开超声波开关。

2. It is strictly forbidden to start the ultrasonic cleaning machine without cleaning fluid, that is, the ultrasonic switch cannot be turned on without adding a certain amount of cleaning fluid to the cleaning cylinder.

3、有加热设备的清洗设备严禁无液时打开加热开关。

3. It is forbidden to turn on the heating switch when there is no liquid in the cleaning equipment with heating equipment.

4、禁止用重物（铁件）撞击清洗缸缸底，以免能量转换器晶片受损。

4. It is forbidden to strike the bottom of the cleaning cylinder with heavy objects (iron pieces) to avoid damage to the chip of the energy converter.

5、超声波发生器电源应单独使用一路220V/50Hz电源并配装2000W以上稳压器。

5. The power supply of ultrasonic generator should use a 220v/50hz power supply separately and be equipped with a voltage stabilizer of more than 2000W.

6、清洗缸缸底要定期冲洗，不得有过多的杂物或污垢。

6. The bottom of the cleaning cylinder should be washed regularly without too much debris or dirt.

7、超声波清洗设备厂家建议您每次换新液时，待超声波起动后，方可洗件。

7. The manufacturer of ultrasonic cleaning equipment recommends that you wash the parts after the ultrasonic starts every time you change the liquid.

通过以上对全自动硅料清洗设备机使用注意事项相关的介绍，相信您对自动化设备有了一定的了解。如果有这方面的问题请点击链接提交需求，我们会帮您问题。

Through the above introduction to the precautions for the use of automatic silicon material cleaning equipment, I believe you have a certain understanding of automatic equipment. If you have any problems in this regard, please click the link to submit the requirements, and we will help you solve the problem.