喷淋清洗机是处理油污重、积碳厚的零件和工件时的首要选择。它已更广泛地用于船舶除锈和船体外部沾附的外部粘附物以及铁路机车车辆的转向架和车厢底部，清洗效果非常好。那么喷淋清洗机检查有哪些关键点呢？

Spray cleaning machine is the first choice when dealing with parts and workpieces with heavy oil and thick carbon deposits. It has been more widely used in ship derusting and removing the external adhesion on the outside of the hull, as well as the bogie and car bottom of railway rolling stock, and the cleaning effect is very good. So what are the key points of spray cleaning machine inspection?

喷淋清洗机的喷嘴无污染或堵塞。如果孔口堵塞，就会阻碍水流和水压，影响清洗机的性能。清洗机的水在清洗循环过程中被循环利用，其中携带的污染物可能停留在喷淋臂内。喷淋臂应定期清洗。

The nozzle of the spray washer is free of pollution or blockage. If the orifice is blocked, the water flow and water pressure will be blocked, and the performance of the cleaning machine will be affected. The water of the cleaning machine is recycled during the cleaning cycle, and the pollutants carried therein may stay in the spray arm. The spray arm shall be cleaned regularly.

喷淋清洗机的喷淋臂上的出水孔面向目标表面。部分清洗机的喷臂在使用过程中松动和旋转，导致喷臂不能面向仪器。许多喷臂两侧都有孔;这些孔可以向上或向下调整。

The water outlet hole on the spray arm of the spray washer faces the target surface. The spray arm of some cleaning machines is loose and rotated during use, resulting in that the spray arm cannot face the instrument. Many spray arms have holes on both sides; These holes can be adjusted up or down.

完整喷枪:部分医院全部喷枪缺失，但机器仍在使用。如果喷淋臂缺失，清洗机无法正常运转，因为水压和水喷淋会大大削弱机械清洗效果。如果喷淋臂没有了，不要使用垫圈。

Complete spray gun: all spray guns are missing in some hospitals, but the machine is still in use. If the spray arm is missing, the cleaning machine cannot operate normally, because the water pressure and water spray will greatly weaken the mechanical cleaning effect. Do not use washers if the spray arm is missing.

喷淋清洗机的底部的排水屏上无杂物:清洗机底部的排水屏会保留仪表组的污染物。筛网少每天拆下清洗一次，或根据使用次数增加清洗次数。堵塞的筛网会阻碍水流和排水，从而影响清洗机的清洗效果。

There are no sundries on the drainage screen at the bottom of the spray washer: the drainage screen at the bottom of the washer will retain the pollutants of the instrument cluster. The screen shall be removed and cleaned at least once a day, or the cleaning times shall be increased according to the use times. Clogged screens will hinder water flow and drainage, thus affecting the cleaning effect of the cleaning machine.

在实际操作过程中对设备都存在有哪些详细要求呢？

What are the detailed requirements for the equipment during the actual operation?

1、清洗机会将被清洗物质放入金属框内，根据清洗物的积垢程度，在一定程度上设定清洗时间，一般3-10分钟，特别难清洗的物质，使用要求可适当延长清洗时间。（严禁把被清洗物质直接放在清洗槽底使用）。

1. The cleaning machine puts the material to be cleaned into the metal frame, and sets the cleaning time to a certain extent, generally 3-10 minutes, according to the scale degree of the cleaning material. For the material that is particularly difficult to be cleaned, the cleaning time can be appropriately extended according to the use requirements. (it is strictly prohibited to put the material to be cleaned directly on the bottom of the cleaning tank for use).

2、清洗机在进行操作时使用的电源是采用三芯插座（相线、零线、地线）。

2. The three core socket (phase line, zero line and ground line) is used as the power supply for the cleaning machine during operation.

3、清洗机的清洗槽内必须要加入清洗液或者是水，其清洗液或者是水的液面不得低于清洗槽高度的三分之二。清洗时，请根据不同的清洗要求，添加洗涤剂，加强清洗效率，所有洗涤剂必须符合不腐蚀清洗机内槽、清洗机的。

3. The cleaning tank of the cleaning machine must be filled with cleaning liquid or water, and the liquid level of the cleaning liquid or water shall not be less than two-thirds of the height of the cleaning tank. When cleaning, please add detergent according to different cleaning requirements to enhance the cleaning efficiency. All detergents must meet the requirements of not corroding the inner tank of the cleaning machine and the cleaning machine.

喷淋清洗机可根据客户的实际产品、产能、清洁度等要求设计，满足不同工业领域的清洗要求设备采用链传动网带运输。网带可根据工件要求选用，采用变频调速;设备具有喷洗、喷淋、烘干、烘干等功能，可根据工件的难易程度进行清洗质量要求：适当增减清洗工位及超声波漂洗，以获得比较好的清洗效果对工件的影响。

The spray cleaning machine can be designed according to the customer's actual product, capacity, cleanliness and other requirements to meet the cleaning requirements of different industrial fields. The equipment is transported by chain drive net belt. The mesh belt can be selected according to the requirements of the workpiece, and frequency conversion speed regulation is adopted; The equipment has the functions of spray washing, spraying, drying and drying, and the cleaning quality requirements can be carried out according to the difficulty of the workpiece: appropriately increase or decrease the cleaning station and ultrasonic rinsing to obtain a better cleaning effect on the workpiece.

喷淋清洗机检查有哪些关键点呢？以上便是问题的相关解答了，如果您对此有什么疑问要解答，或者说有购买需求，直接关注我们网站进行咨询吧。

What are the key points of spray cleaning machine inspection? The above is the relevant answer to the question. If you have any questions or purchase needs, please directly follow our website for consultation.