通过式清洗机的工作流程是怎样的呢？下面山东超声波清洗机厂家为您讲讲这个问题，让您在使用该设备的时候不出什么问题。

What is the working process of the pass through cleaner? Next, Shandong ultrasonic cleaning machine manufacturer will tell you about this problem so that you can use this equipment without any problems.

1、检查清洗液在工作前的浓度和配比，水位是否足够高。

1. Check the concentration and proportion of cleaning solution before operation and whether the water level is high enough.

2、打开水箱和水泵之间的两个闸阀。

2. Open the two gate valves between the water tank and the water pump.

3、将洗涤罐和冲洗水箱的电接触温度计分别设置为50～60度。

3. The electric contact thermometers of the washing tank and the washing water tank are set at 50 to 60 degrees, respectively.

4、把电源控制开关和钥匙放在打开的位置。

4. Put the power control switch and key in the on position.

5、连接外部蒸汽加热，调节T1和T2温控表。

5. Connect external steam heating and adjust T1 and T2 temperature control meters.

6、打开加热器，使其开始自动加热。

6. Turn on the heater to start automatic heating.

7、打开除油装置，开始除油，因此水泵不打开，水面平静，排油效果好。

7. Open the oil removal device to start oil removal. Therefore, the water pump does not open, the water surface is calm, and the oil discharge effect is good.

8、当温度上升到预定值时，操作者开始工作，操作者根据需要选择开关。根据每个单动按钮，进行泵、雾、运输等。

8. When the temperature rises to a predetermined value, the operator starts to work, and the operator selects the switch as required. Pump, fog, transport, etc. according to each single action button.

当机器运行时，操作者可连续地将输送带装入装载口，冲洗、漂洗、吹干和输出，并在卸货港移除清洁部件。

When the machine is running, the operator can continuously load the conveyor belt into the loading port, wash, rinse, blow dry and output, and remove the cleaning parts at the unloading port.

通过式清洗机认真维护保养是保持设备良好性能和延长使用寿命的保证。维护保养分为日常保养和定期维护保养两种，日常保养的内容有：

Careful maintenance of the through type cleaning machine is the guarantee to maintain the good performance of the equipment and prolong the service life. Maintenance is divided into daily maintenance and regular maintenance. The contents of daily maintenance include:

开机前要检查润滑油是否充足，要检查各个连接零部件是否连接紧密，要检查过滤网是否干净等。高压清洗任务完成后，要排放干净机器设备内的残留水，擦拭干净机器，收纳好进水管和出水管，把设备放置在通风干燥的地方。

Before startup, check whether the lubricating oil is sufficient, whether the connecting parts are tightly connected, and whether the filter screen is clean. After the high-pressure cleaning task is completed, the residual water in the machine and equipment shall be drained, the machine shall be wiped, the water inlet and outlet pipes shall be stored, and the equipment shall be placed in a ventilated and dry place.

通过式清洗机还要定期维护保养，定期更换机油，通常在运转200小时后，更换新的机油，防止旧机油润滑效果差磨损机器。定期检查密封圈是否老化，及时更换新的密封圈，保持设备良好的密封性。

The through type cleaning machine shall also be regularly maintained and the engine oil shall be replaced regularly. Usually, after 200 hours of operation, the new engine oil shall be replaced to prevent the old engine oil from wearing the machine with poor lubrication effect. Regularly check whether the sealing ring is aging, and replace the new sealing ring in time to maintain good sealing performance of the equipment.

正确操作使用才能防止故障，长期保持良好性能，发挥设备的作用。所以以上的工作流程等内容要充分了解到才，更多事项就来我们网站咨询吧。

Correct operation and use can prevent failure, maintain good performance for a long time, and play the role of the equipment. Therefore, you should fully understand the above workflow and other contents. For more information, please visit our website .