通过式喷淋清洗机具有多工位，功能全，结构合理，操作方便，清洗效果好的优点，对于流水线零件的清洗，改善劳动环境，提高清洗质量有重要意义。其使用范围较广，适用于各种五金零件，压铸件，液压件，齿轮，轴承，汽车零部件等各种制造业。

The through-type spray cleaning machine has the advantages of multiple stations, complete functions, reasonable structure, convenient operation, and good cleaning effect. It is of great significance for the cleaning of assembly line parts, improving the labor environment, and improving the cleaning quality. Its wide range of use is suitable for various manufacturing industries such as hardware parts, die castings, hydraulic components, gears, bearings, automotive components, and so on.

通过式喷淋清洗机工作前先检查清洗液的配方浓度和配方比例是否合适，水箱液面高度是否够；分别调定清洗液箱和漂洗液箱的电接点温度计为50-60度；用钥匙将电源控制开关，置于开位置；开启加热器，使其开始自动加温；开启浮油排除装置开始浮油排除，因此式水泵未开启，水面平静，排油效果好。

Before working, check whether the formula concentration and proportion of the cleaning liquid are appropriate, and whether the liquid level in the water tank is high enough; Set the electric contact thermometer of the cleaning solution tank and the rinsing solution tank to 50-60 degrees respectively; Use the key to turn the power control switch to the ON position; Turn on the heater to start automatic heating; Start the oil slick removal device to remove the oil slick. Therefore, the water pump is not turned on, the water surface is calm, and the oil discharge effect is good.

等温度升到预定值后即开始工作，操作者根据需要选择开关，按每个单动按钮，使水泵，吸雾，输送等全部动作。当机器运行后，操作工人便可以在装料口不断地把零件装载输送网带，清洗，漂洗，吹干，输出，在卸料口取下清洗好的零件

After the temperature rises to a predetermined value, the operation starts. The operator selects the switch as needed, and presses each single action button to make the water pump, mist suction, and transportation all operate. After the machine is running, the operator can continuously load the parts onto the conveyor belt at the loading port, clean, rinse, blow dry, output, and remove the cleaned parts from the unloading port

通过式喷淋清洗机清洗工作结束后，当零件取下，按停止按钮，全机停止。清洗液应定期添加自来水和一定比例的金属清洗液以补充消耗，使液面保持在一定高度，如果清洗效果达不到工艺要求时，应全部更换清洗液。清理设备污垢后，关闭电源。

After the cleaning work of the through-type spray cleaning machine is completed, when the parts are removed, press the stop button to stop the entire machine. The cleaning fluid should be regularly added with tap water and a certain proportion of metal cleaning fluid to supplement consumption, keeping the liquid level at a certain level. If the cleaning effect does not meet the process requirements, all cleaning fluids should be replaced. After cleaning the dirt on the equipment, turn off the power supply.

此外在使用通过式喷淋清洗机中，我们要做好日常维护工作。按照正确的方法，做好一些维护工作，及时发现通过式喷淋清洗机设备的一些小问题，减少不必要的故障。

In addition, when using a through-type spray cleaning machine, we need to do a good job in daily maintenance. According to the correct method, do some maintenance work well, timely discover some small problems of the through-type spray cleaning machine equipment, and reduce unnecessary failures.

当通过式喷淋清洗机出现问题时，维修工作是非常必要的。当我们做这些通过式喷淋清洗机维护工作时，我们需要注意各个方面，这样我们才能更好地完成整个通过式喷淋清洗机维护工作。

When there is a problem with the through-type spray cleaning machine, maintenance work is very necessary. When performing maintenance work on these through-type spray cleaning machines, we need to pay attention to various aspects, so that we can better complete the entire through-type spray cleaning machine maintenance work.

因此，在通过式喷淋清洗机设备的日常使用过程中，我们应该采取正确的方法认真做好这些日常维护工作，这样通过式喷淋清洗机设备才能更好。更多相关内容就来我们网站咨询了解吧！

Therefore, in the daily use of through-type spray cleaning machine equipment, we should take the correct methods to carefully perform these daily maintenance tasks, so that through-type spray cleaning machine equipment can be better. For more relevant content, please visit our website Consult and understand!