在很多领域都可以使用多槽手动超声波清洗机来进行物品的清洗，因为这样清洗出来的物品比手工清洗的洁净程度更高，但是要想获得更好的清洗质量，大家除了要按照要求来进行操作各项程序之外，还需要了解多槽式超声波清洗机的这些使用注意事项。

In many fields, the multi tank ultrasonic cleaner can be used to clean items, because the items cleaned in this way are more clean than those manually cleaned. However, in order to obtain better cleaning quality, in addition to operating procedures according to requirements, we also need to know these precautions for the use of the multi tank ultrasonic cleaner.

1.清洗篮

1. Cleaning basket

在使用多槽式超声波清洗机清洗一些较小的零件物品时经常需要使用清洗筐，但是清洗筐上的网眼会引起超声衰减，所以要特别引起注意，注意选择网眼大小合适的清洗篮，此外建议选用不锈钢材质的清洗篮，尽量不要使用塑胶框，这样能够防止静电的产生。

When using a multi slot ultrasonic cleaner to clean some small parts, it is often necessary to use a cleaning basket. However, the mesh on the cleaning basket will cause ultrasonic attenuation, so special attention should be paid to the selection of a cleaning basket with an appropriate mesh size. In addition, it is recommended to use a stainless steel cleaning basket and try not to use a plastic frame to prevent static electricity.

2.清洗时间

2. Cleaning time

通常在清洗时每道工序的时间定为三五分钟，如果被清洗物品的表面积比较大，或者工件的结构较为复杂时，要注意根据实际情况酌情调整多槽式超声波清洗机的清洗时间。若被清洗物容易出现重叠以及粘附的现象，那么在将被清洗物放入及取出槽液的时候可以抖动一下工件，让清洗剂充分与工件接触以提高清洗效果。

Generally, the cleaning time of each process is set as three to five minutes. If the surface area of the object to be cleaned is large or the structure of the workpiece is complex, the cleaning time of the multi slot ultrasonic cleaner should be adjusted according to the actual situation. If the objects to be cleaned are prone to overlap and adhesion, shake the workpiece when putting the objects to be cleaned into and taking out the bath solution, so that the cleaning agent can fully contact the workpiece to improve the cleaning effect.

3.加液和串槽

3. Liquid filling and channeling

用多槽式超声波清洗机清洗工件要注意槽液不能加得太满，以免发生两槽超声波清洗剂之间相互混合以及沥干时清洗筐底部黏液的现象。此外，多槽式超声波清洗机的每个槽应为独立的操作工序，注意不要将两槽清洗剂相互串用或人为减少操作工序以及清洗的操作时间。

When using a multi tank ultrasonic cleaner to clean workpieces, it should be noted that the tank solution should not be too full, so as to avoid the phenomenon that the ultrasonic cleaning agents in the two tanks are mixed with each other and the mucus at the bottom of the cleaning basket is drained. In addition, each tank of the multi tank ultrasonic cleaner shall be an independent operation process. Be careful not to use the cleaning agent of the two tanks in series or reduce the operation process and cleaning time artificially.

多槽式超声波清洗机尽管拥有非常高的清洁性能，但那是在按照及规定和要求进行操作的情况下，只有在使用超声波清洗机清洗工件时按程序执行才会得到好的清洗效果。更多相关内容就来我们网站咨询吧！

Although the multi slot ultrasonic cleaning machine has very high cleaning performance, it can only get good cleaning effect when the ultrasonic cleaning machine is used to clean the workpiece according to the procedures under the condition of operating according to the regulations and requirements. For more information, please visit our website !