碳氢清洗机的优势比较多，但是在使用过程中，也会因为操作失误出现故障。很多时候就需要我们在操作碳氢清洗机的时候多加注意了，接下来小编为您讲解相关事项。

The hydrocarbon washer has many advantages, but in the process of use, it will also fail due to operational errors. Many times, we need to pay more attention when operating the environment-friendly hydrocarbon cleaning machine. Next, we will explain the relevant matters for you.

一般来说在运行碳氢清洗机之前就要先接通设备电源，水源，气源。然后工作人员要先去检查进水压力须达到0.3～0.5MPa，这个时候如果它的进水压力低于0.15MPa。

Generally speaking, the equipment power, water source and gas source shall be connected before the hydrocarbon washer is operated. Then the staff should check that the water inlet pressure must reach 0.3~0.5MPa, if the water inlet pressure is lower than 0.15MPa at this time.

就要在电控箱上的黄色按钮灯亮，设备无法启动。然后在进行调整进水压力大于0.15MPa，接着按黄色按钮复位，在黄灯不亮的情况下，碳氢清洗机设备就可以启动了。

The yellow button on the electric cabinet will light up, and the equipment cannot be started. Then adjust the water inlet pressure to be greater than 0.15 MPa, and then press the yellow button to reset. When the yellow light is not on, the hydrocarbon washer can be started.

除此以外，在用碳氢清洗机的时候还需要大家定期检查和清洗进水过滤器和滤网，一定要保持它的滤网进水清洁、畅通。

In addition, when using the hydrocarbon washer, you also need to regularly check and clean the water inlet filter and filter screen, and make sure that the water inlet of the filter screen is clean and unblocked.

这是很重要的一点，之前就会有很多用户在用的时候不注意这一点，经常就会出现滤网的情况，要是长时间操作的话对于设备的运行效果影响是很大的，严重的话还会损坏设备的。所以说定期的检查也是不可忽视的一个问题。

This is a very important point. Many users have not paid attention to this before, and the filter screen often occurs. If the filter screen is operated for a long time, the operation effect of the equipment will be greatly affected, and the equipment will be damaged in serious cases. Therefore, regular inspection is also a problem that cannot be ignored.

操作人员在使用碳氢清洗机的时候还需要把它的曲轴箱油位和油质也是要定期去查看的。一定要按照技术文件要求定期更换润滑机油。更多相关内容就来我们网站咨询了解吧！

When using the hydrocarbon washer, the operator also needs to check its crankcase oil level and oil quality regularly. The lubricating oil must be replaced regularly according to the requirements of the technical documents. Come to our website for more information!